Quick Answer
To set up Bluebot, download the Bluebot app, power on your device, follow the in-app setup steps, and clamp Bluebot onto your pipe. The app will guide you through the entire process in about 10 minutes.
Before You Start
Make sure you have:
Your Bluebot device powered on
A smartphone or tablet
Your Wi-Fi network name and password (if using a Wi-Fi model)
Access to the pipe where Bluebot will be installed
Step 1: Download the App
Download the Bluebot Water app from:
Apple App Store (iOS 14 or newer)
Google Play Store (Android 12 or newer)
Open the app and sign in or create an account.
Step 2: Start Setup
Open the app and go to the Dashboard
Tap Add Device (+ in the upper right corner)
When prompted, power on your Bluebot
Watch the LED light next to the power button
Green light means Bluebot is ready to pair
Step 3: Connect to the Network
Follow the in-app instructions to:
Select your Wi-Fi network (Wi-Fi models), or
Confirm gateway connection (LoRaWAN models)
Enter your network password when prompted.
Step 4: Install Bluebot on the Pipe
Choose a clean, straight section of the main cold water line
Sand and clean the pipe if needed
Clamp Bluebot tightly onto the pipe
Let Bluebot automatically scan and adjust
No pipe cutting or water shutoff is required.
Step 5: Confirm Setup
Solid blue LED means Bluebot is online
Flow will appear in the app when water runs
Setup is complete.
If Setup Doesn’t Work
Double-check Wi-Fi name and password
Make sure you’re on the main cold water line
Ensure Bluebot is tightly clamped to a clean pipe
Review the LED color for guidance
Need Help?
If you get stuck, contact Bluebot Support and let us know. We are here to help.