Skip to main content

How to Connect Bluebot to Your Network (Wi-Fi & LoRaWAN)

Updated over 2 weeks ago

Quick Answer

Bluebot connects to your network during setup using the Bluebot app. Wi-Fi models require a 2.4 GHz Wi-Fi network, while LoRaWAN models connect through a gateway. For best results, complete setup near your router, then move the device to its install location.

Before You Start

Make sure you have:

  • Your Bluebot powered on

  • The Bluebot app installed

  • Your Wi-Fi network name and password (Wi-Fi models)

  • Your gateway powered and online (LoRaWAN models)

Step 1: Check Wi-Fi Strength (Wi-Fi Models Only)

Bluebot works best when installed within 30–40 feet of a strong Wi-Fi signal.

How to check:

  1. Connect your phone to your Wi-Fi

  2. Stand where you plan to install Bluebot

  3. Check your signal strength

What to look for:

  • 2 or more bars: Good

  • 1 bar or less: Connection may be unstable
    → Consider a Wi-Fi extender

If signal is strong but connection fails, interference may be the cause.

Step 2: Put Bluebot into Setup Mode

  1. Plug in your Bluebot

  2. Press and hold the power button for 5–10 seconds

  3. Release when the LED turns solid green

Solid green means Bluebot is in setup mode and ready to pair.

Step 3: Join Bluebot During Setup

  • Follow the in-app prompts

  • When the Join prompt appears, tap it right away
    (This can take up to 30 seconds)

Tip:
If you wait too long, the setup process may restart. Just repeat Step 2 if needed.

Step 4: Select Your Network

  1. Choose your Wi-Fi network from the list

  2. Enter your password

  3. Continue setup

Important Wi-Fi Notes

  • Bluebot supports 2.4 GHz networks only

  • Dual-band networks are OK if 2.4 GHz is available

  • If your network has no password, enter one space in the password field to continue

Step 5: Confirm Connection

Watch the LED during connection:

  • Solid blue: Connected and online

  • Red: Connection failed (check Wi-Fi name, password, and signal strength)

Once connected, the app will confirm success.

Step 6: Move to Install Location

After pairing:

  • Unplug Bluebot

  • Take it to the install location

  • Plug it back in

Bluebot will automatically reconnect to your network.
Strong Wi-Fi is preferred, but some installs may work with a weaker signal.

Connecting with LoRaWAN (EcoLink & ProLink)

LoRaWAN models do not use Wi-Fi at the meter. They connect through a gateway.

If Your Gateway Uses Ethernet

  1. Power everything off:

    • Modem

    • Router

    • Gateway

    • Bluebot

  2. Power devices back on in this order:

    • Modem → Router → Gateway → Bluebot

  3. Wait for each device to fully come online before continuing

If Your Gateway Uses Cellular (LTE)

  • Confirm the SIM card is installed correctly

  • Confirm the gateway is powered

  • Cellular must be preconfigured

Bluebot will automatically connect when powered on.

Add the Device in the App

After the gateway is online:

  • Open the app

  • Complete device registration

  • Add Bluebot to your account

If Connection Still Fails

  • Try connecting Bluebot to a mobile hotspot

    • If hotspot works → issue is your network

  • Try a different phone or tablet

  • Restart the setup process

If problems persist, contact Bluebot Support and include:

  • Device model

  • LED color

  • Network type (Wi-Fi or LoRaWAN)

Did this answer your question?